sellers' 3076 MS6 build

[sellers]

Welp, here we go.

So far I have:
CP-E Whale Penis
ATP 3076 .60 a/r

Looking around to find a used mani and EWG. Got the turbo from a local member who blew his shit running at 26psi for 40k miles on a block that started at 60k miles when he bought it, if that says anything about this motor...Anyway, a piece of the block went through the turbo, so the fins are fucked on the wheel, but I'll be sending it in for a rebuild. Hope to have all of this done by June so I can get that Dustin dyno tune!

[I Love Brownies]

sellers what are they charging you for the rebuild? 300-500?

[sellers]

Not sure yet. I think Greg (triplejumper) got his rebuilt for like $750 from ATP with a new CHRA which is what I would need.

[sellers]

Just called ATP...$552 for the new CHRA and $100 for the rebuild.

[I Love Brownies]

thats a pretty good price man

[4G63]

Damn what a good suprise. Big turbo sellers FTW! Good job man best of luck coming out there Sat to see Jarod so he can help with my meth install if ur bored and wanna meet up

[dougefresh_]

Cool shit bro, congrats! I picked up a SteedSpeed Mani for the top mount set up, and I'll be selling my DNP (has 2K miles on it at most & tapped for egt). However, I need to do my install first, so you may not want to wait around for that.

[rfinkle2]

Best of luck Sellers.

I'm waving the white flag etc.

[spoolin00]

Fuck yes!!!!

What are your power goals??

[sellers]

Originally Posted by rfinkle2 Best of luck Sellers. I'm waving the white flag etc.

I don't even know what that means, but thanks!

Originally Posted by spoolin00 Fuck yes!!!! What are your power goals??

Ummmmmmmm. Reliable power. This bitch is my DD. I'm thinking somewhere around 400 with the Dustin tune on a relatively low psi (20ish). I'm not looking to break any milestones here.

Originally Posted by danems6 PM'd sir. I haz used goodz.

Replied, thanks!

Originally Posted by dougefresh_ Cool shit bro, congrats! I picked up a SteedSpeed Mani for the top mount set up, and I'll be selling my DNP (has 2K miles on it at most & tapped for egt). However, I need to do my install first, so you may not want to wait around for that.

Thanks, it may be a while before I throw everything on, all depends on the money situation. I'll let you know.

[dougefresh_]

Originally Posted by sellers Thanks, it may be a while before I throw everything on, all depends on the money situation. I'll let you know.

I'm in the same boat! Got some vultures interested in DNP already, lol. Looking forward to your build man. Have you already done your injector seals, or are we just getting underway?

[sellers]

Originally Posted by dougefresh_ I'm in the same boat! Got some vultures interested in DNP already, lol. Looking forward to your build man. Have you already done your injector seals, or are we just getting underway?

Just slowly gathering the pieces. Still waiting on fuel pump internals. Probably gonna need injector seals. Mani, EWG, and the list goes on

[danesti]

PM'd sir.
I haz used goodz.

[enkiddu]

sub'd for neighborhood / NATOR MO support

also, I may try to but in on the meth install, since i'm in the neighborhood too

[4G63]

Originally Posted by enkiddu sub'd for neighborhood / NATOR MO support also, I may try to but in on the meth install, since i'm in the neighborhood too

Do it! Gonna be at Jarods at 2:30pm Saturday so be there! Hopefully have my suprisingly not so black wheels anymore when I get there

Tyler are u gonna build the block or do what I'm doing when I get money and push that stock block baby!!! New ATR rocks at least that's what I hear DJ is my puppet master haha

[sellers]

Originally Posted by AdrenalineRush Do it! Gonna be at Jarods at 2:30pm Saturday so be there! Hopefully have my suprisingly not so black wheels anymore when I get there Tyler are u gonna build the block or do what I'm doing when I get money and push that stock block baby!!! New ATR rocks at least that's what I hear DJ is my puppet master haha

Fuck no I don't have the money for that shit.

[wette460]

sounds like a nice setup sellers. Best of luck man. Can't wait to see the numbers after Dustin does his magic.

[xdm88]

sweeeeeeeet dude, congrats on the bt! this summers gonna have a strong force of speeds in the area, lets get a detail day goin and some photos representin mo nator when your back in town

[zx2man]

The BT bug seems to be hitting more and more of us latly. But that what happens when we get a alittle tiny k04 to run a 2.3 liter engine. Goodluck on your build.

[bmylez]

You think the k04 is small? The vee-dubs get a friggin k03. That is big time for the lose. But yeah, our turbo is small.

[triplejumper18]

Originally Posted by bmylez You think the k04 is small? The vee-dubs get a friggin k03. That is big time for the lose. But yeah, our turbo is small.

Yeah and they are fucking slow.

[i8urgti]

Originally Posted by bmylez You think the k04 is small? The vee-dubs get a friggin k03. That is big time for the lose. But yeah, our turbo is small.

and a common upgrade for them is the K04

[bmylez]

Bahaha. Nice.

[Haltech]

Dude wont eat pussy but will go BT on a stock block? wtf

3076TS T-3 .82.. pussy

[burn813]

I needz a mani fewl

[AZSPEED3]

GL on the BT build. Should produce some very nice numbers once complete with DJ tune

[Jedyboyrokr]

GL man but Jason's stuff is cursed lol...cause his other parts blew up another MS6 lol....i was offered the manifold cause it wasnt installed on the second car but none of that shit is touching my car lol

[dougefresh_]

Stop blowing down an 8-ball of blow a week, and curb you liquor intake to a handle a week, and you could buy my mani in ummmm....3 days?! lol

[burn813]

Hey Tyler...... I haz mani ..... Almost there..... I will be there in a month hopefully

[sellers]

Originally Posted by Jedyboyrokr GL man but Jason's stuff is cursed lol...cause his other parts blew up another MS6 lol....i was offered the manifold cause it wasnt installed on the second car but none of that shit is touching my car lol

Cursed? He ran 26psi on a stock block starting at 80k miles......it was a miracle it made it as long as it did. Not to mention Adrenaline fucking up his FMIC and Spark Plug installs, so his car ran like shit for a few thousand miles, I'm sure that wasn't good on the engine...

Originally Posted by dougefresh_ Stop blowing down an 8-ball of blow a week, and curb you liquor intake to a handle a week, and you could buy my mani in ummmm....3 days?! lol

I have the money for used parts, not for rape me in the ass new part prices. My drinking habits will stay the same.

Originally Posted by burn813 Hey Tyler...... I haz mani ..... Almost there..... I will be there in a month hopefully

Good luck.

[jwilkins88]

So I haven't been paying attention. First time I've read this thread. Get your shit done Tyler

[sellers]

Mani and EWG go in the mail tomorrow.

[jwilkins88]

You send your turbo off?

[sellers]

Soon

[sellers]

Ok, this is more just for me so I can keep track of what I still need.

Just bought:
DNP Mani modded for EWG and Tial 44mm EWG
Silicone vacuum line

Still need:
1) Send turbo to ATP
2) Possibly buy a small piece of aluminum to connect hot pipe to turbo outlet...can anyone comment on if I need this or if the DNP mani and 3076 sit at the same height in the engine bay?
3) T-bolt clamps to replace shitty CP-E worm clamps
4) Oil Return line from ATP

[jwilkins88]

Originally Posted by sellers 2) Possibly buy a small piece of aluminum to connect hot pipe to turbo outlet...can anyone comment on if I need this or if the DNP mani and 3076 sit at the same height in the engine bay?

It's the length of the outlet not the manifold. The 3076 has a smaller penis.

[bmylez]

The compressor outlet on a GT turbo is lower than the stock turbo. The DNP manifold is stock location, so that means you will need an extension to connect the outlet.

[sellers]

Ok, so I need to find me like a 2.25" piece of aluminum thats like 2" long with bead rolled ends..

[bmylez]

You don't need bead rolled ends, necessarily. What I found works really well is sanding the pipe *and* sanding the inside of the coupler. It creates a lot of grip. I blew my outlet coupler off once...sanded everything down and it hasn't budged for over 1000 miles. Pretty sure a 6" pipe should fit there.

[jwilkins88]

Originally Posted by bmylez You don't need bead rolled ends, necessarily. What I found works really well is sanding the pipe *and* sanding the inside of the coupler. It creates a lot of grip. I blew my outlet coupler off once...sanded everything down and it hasn't budged for over 1000 miles. Pretty sure a 6" pipe should fit there.

6 inches? He needs at most 4".

Bead rolled is the only way to go.