Cams

[SarcasticOne]

CORKSPORT Mazdaspeed Camshafts for DISI MZR Motor

[Easter Bunny]

But what if we wanted a Lopey idle? Otherwise how do the honda fucks know you are serious?

[SarcasticOne]

Found by someone else other than me... Just reposting here as am sure there is people interested

[NCspecV81]

The dyno on there I wonder if that's stock everything vs stock everything + cams?

[Sid3wayS]

Ummm just so u all are aware... The tapet chart has intake and ex sides flipped... Might confuse some and lead to VERY bad issues... Jus sayn

[shadesofgray19]

Originally Posted by NCspecV81 The dyno on there I wonder if that's stock everything vs stock everything + cams?

If you read, it does say stock motor and k04 were compared and up to 26hp increase. Probably not stock everything, as what is the point.

[NCspecV81]

Originally Posted by shadesofgray19 If you read, it does say stock motor and k04 were compared and up to 26hp increase. Probably not stock everything, as what is the point.

Fully bolted and tuned is also stock motor

[SpencerC]

Ooops. So these are not for sale yet. Nice find though. Ha! Good luck finding it again.

[Code Monkey]

Who's the faggot that did not take screen shots?

[Sid3wayS]

Originally Posted by Spencer@CorkSport Ooops. So these are not for sale yet. Nice find though. Ha! Good luck finding it again.

Make sure to fix the tappets page before you destroy some newbs head.

[Agent_Orange]

Originally Posted by Sid3wayS Make sure to fix the tappets page before you destroy some newbs head.

Free set of cams for this guy.

@Spencer@CorkSport;

[Easter Bunny]

Originally Posted by Spencer@CorkSport Ooops. So these are not for sale yet. Nice find though. Ha! Good luck finding it again.

Post a screen shot or I fuck your mom





















Again

[maisonvi]

When they actually list them they will be cheaper than what was on there originally

Sent from my XT907 using Tapatalk

[Easter Bunny]

I hope they are shipping them with the necessary friction washers.

[SarcasticOne]

Originally Posted by Code Monkey Who's the faggot that did not take screen shots?

I did just in case :p

[NCspecV81]

and the files that go with them

[shadesofgray19]

I did not see that you posted the white paper, so here it is.

[Johnasaurus]

2 weeks....second revision? But really, I'd like to see how these play out.

[blackms3_71]

So u guys think if ur fully bolted making 290-300whp that this would put u up to 310-320whp ?

[Easter Bunny]

@Spencer@CorkSport; in the white paper under the camshaft design heading it should be "a blank camshaft is needed" or "blank camshafts are needed"

The installation instructions should say additional parts

Originally Posted by Code Monkey Who's the faggot that did not take screen shots?

I didn't take screen shots. Come at me bro.

[CrawlingMS3]

Quit making products I want to buy, damn it
#ineedtostopspendingmoney

[someguy]

Wow...that's quite the install. Might as well pull the engine and rebuild while you're at it lol

[maisonvi]

Originally Posted by someguy Wow...that's quite the install. Might as well pull the engine and rebuild while you're at it lol

Did y think cams would be easy? Especially with vvt.

Sent from my XT907 using Tapatalk

[Easter Bunny]

Originally Posted by someguy Wow...that's quite the install. Might as well pull the engine and rebuild while you're at it lol

Seriously did you think it was going to be easy? Do you know what a camshaft is?

[Sid3wayS]

This is definetly something that if it takes u longer then 20 min to swap an intake this aint for you.

Also corksport.... A free set is a bit much but for sure ill take a discount

[someguy]

Originally Posted by Easter Bunny Seriously did you think it was going to be easy? Do you know what a camshaft is?

Well ya, I know what a camshaft is lol just was commenting because that's the longest CS instruction sheet I've ever seen. I knew it was tough.

[Voltwings]

Looks like a decent bit of lift but no duration lol interesting looking cam profile... Do we have any official specs corksport?

[SpencerC]

Originally Posted by Easter Bunny @Spencer@CorkSport; in the white paper under the camshaft design heading it should be "a blank camshaft is needed" or "blank camshafts are needed" The installation instructions should say additional parts I didn't take screen shots. Come at me bro.

Thanks, it's nice to see that the only typo in the whole white sheet and listing is "are/is" mixed up.

And where do you mean it should say additional parts? You mean where it has "Addition Parts List" I guess that would make sense.

[Easter Bunny]

Originally Posted by Spencer@CorkSport Thanks, it's nice to see that the only typo in the whole white sheet and listing is "are/is" mixed up. And where do you mean it should say additional parts? You mean where it has "Addition Parts List" I guess that would make sense.

yes,

you should really send me the info for all the pre-release stuff, i wouldn't mind proofreading for the small cost of 4 injectors

[SpencerC]

Ha. I bet. I assume that you would also want free camshafts for the cost of testing our injectors. Lol.

[Easter Bunny]

Originally Posted by Spencer@CorkSport Ha. I bet. I assume that you would also want free camshafts for the cost of testing our injectors. Lol.

no way fuck that install

edit:i didn't specify stock or corksport but thanks for saying "our" injectors to confirm you are still working on them

[Gr8Speed]

Originally Posted by someguy Well ya, I know what a camshaft is lol just was commenting because that's the longest CS instruction sheet I've ever seen. I knew it was tough.

Guys I knew it was tough. I'll have you know, I've pulled the intake off this car 7 times. I know all about installs.

So do the cams go in the motor? Or are they just a bolt-on?

[Dizzy Turbo]

It's a bolt in mod

Sent from my HTC One using Tapatalk

[Easter Bunny]

it only takes bolts to install, just a lot of them

[someguy]

Originally Posted by Dizzy Turbo It's a bolt in mod Sent from my HTC One using Tapatalk

Clearly he was making fun...


But I've done pretty well any bolt on install there is for these cars and a few other cars and have pulled a couple motors in my day, but haven't ever been toying with the guts of the engine (yet).

[Matrix311]

looks like a fun afternoon of wrenching to put these bad boys in.

[anavrinIV]

I've done the vvt replacement with a lot of help from some great guys here. Installing cams is doing all of that over plus replacing the cams and buckets.

Not for me. At least not yet.

[nortigid]

Originally Posted by Spencer@CorkSport Ooops. So these are not for sale yet. Nice find though. Ha! Good luck finding it again.

CORKSPORT Mazdaspeed Camshafts for DISI MZR Motor

r u srs

[Gr8Speed]

Originally Posted by nortigid CORKSPORT Mazdaspeed Camshafts for DISI MZR Motor r u srs

That's cached...

[SpencerC]

props to you, but that isn't the current listing... lol..

Stupid Google stealing all our info and caching it. Nice work.