Inside the upcoming CorkSport Blow Off Valve

[faeker]

Originally Posted by The Nut Your in desperate need of a donate mod before you worry about BPVs kid.

That should have been a requirement as well.

sent with smiles and mouth hugs

[ms3_goon]

Originally Posted by faeker That should have been a requirement as well. sent with smiles and mouth hugs

Should've been a given.

Donate brownie faggots.

[Deldran]

If using a aftermarket bpv/bov didn't throw me in street mod in AX I would pick one up but I am pretty sure it does so until big turbo no bov/bpv upgrade for me

Sent from my Nexus 4 using Tapatalk 2

[Tokay444]

Originally Posted by Joel@CorkSport The springs we use are actually from an industrial company and have been tested in much more demanding conditions than a BOV. We are actually toying with the idea of using them in much different applications as well. Cheers, Joel

Like in a cdfp?

[The Nut]

Originally Posted by faeker That should have been a requirement as well. sent with smiles and mouth hugs

Sorry to clutter this thread with this but if your making your 100th post without having donated yet, Kevin should hand out a temporary ban mod until the situation is remedied. I only bring this up cause I feel like if someone hasn't donated yet and they think they should be considered for being a product tester for one of our top vendors on the premiere forum for Mazdaspeed performance enhancement, then obviously it's not sinking in. Just sayin.

Speaking of which, when I get my paycheck next week, I'll donate again.

[mrmonk7663]

@Joel@CorkSport; Seeing how I put that PMM of yalls through hell in back in less than 3 weeks, I'd be more than happy to do some testing for you all and see if I find anything.

[BigRedSpecial]

Just ordered a GFB Response so I'm probably out but I love the design. Should alleviate fitment issues some people were reporting with large intakes

[2.0t03speed]

i think the only thing i'm not sure i like about this bpv is that the vac/boost source is coming straight off the top.

[faeker]

Originally Posted by 2.0t03speed i think the only thing i'm not sure i like about this bpv is that the vac/boost source is coming straight off the top.

why? A number of bov/bpv's do the same. Turboxs, greddy, gfb, forge, yada yada yada.

[2.0t03speed]

Originally Posted by faeker why? A number of bov/bpv's do the same. Turboxs, greddy, gfb, forge, yada yada yada.

yea it's not that big of a deal just replace the short oem vac line with a longer one.

[CorkSport]

Originally Posted by 2.0t03speed i think the only thing i'm not sure i like about this bpv is that the vac/boost source is coming straight off the top.

Actually, the production version will have an adjustable banjo fitting so you'll have 360 degrees of adjustability.

[2.0t03speed]

Originally Posted by Joel@CorkSport Actually, the production version will have an adjustable banjo fitting so you'll have 360 degrees of adjustability.

that is what i'm talking about!!!!!

[dale_gribble]

Banjo=opportunity for leaks. IMO index that bpv vacuum inlet where it makes sense and lock that shit down into the body of the valve like a stock valve. Supply 3' of vacuum hose and it works for everyone plus fewer parts and cheaper assembly.

That's one of the things I liked about the prototype.

[SLOWHATCH]

Glad to see it's not coming with the vac port straight off the top. By the time you bend a hose to fit it would take up any of the space "saved" with the smaller design.

[faeker]

Originally Posted by dale_gribble Banjo=opportunity for leaks. IMO index that bpv vacuum inlet where it makes sense and lock that shit down into the body of the valve like a stock valve. Supply 3' of vacuum hose and it works for everyone plus fewer parts and cheaper assembly. That's one of the things I liked about the prototype.

Or just use a 90 port. Even if they did a straight up there are ways to work with it if people are looking for ultimate space saving. Maybe line up, 90 adapter, straight line.

sent with smiles and mouth hugs

[agentgordon27]

Originally Posted by Joel@CorkSport The springs we use are actually from an industrial company and have been tested in much more demanding conditions than a BOV. We are actually toying with the idea of using them in much different applications as well. Cheers, Joel

Much more demanding, like say, hot exhaust gas, perhaps external waste gate? We should start a hang man thread!

[dale_gribble]

Originally Posted by dale_gribble Banjo=opportunity for leaks. IMO index that bpv vacuum inlet where it makes sense and lock that shit down into the body of the valve like a stock valve. Supply 3' of vacuum hose and it works for everyone plus fewer parts and cheaper assembly. That's one of the things I liked about the prototype.

Ya to clarify, I can see the fitment issues with a straight up inlet off the valve so that may not be the best. I was in my head picturing a fixed non adjustable 90 degree inlet just like the factory BPV.

[Goodrich27]

Originally Posted by Joel@CorkSport Nope.... but.... I am actually looking for 10 early adopters that I could give a slight discount to, provided they give un-biased reviews on MSF and install them early.

Im in also Joel

[Colin1337]

Any sound clips of this yet or expected soon?

Sent via banana

[Alexander]

Just curryous, will routine maintenance be required like in most other piston bpvs?

Sent from my microwave

[Flipboi89]

Can I still get on the list?



Nudez sent....

[The Nut]

Does it come with large talons?

[daniely]

I'd be down as well

[The Nut]

For all those STILL trying to get on "the list", if your not going to take 5 min to take to read the thread, please at least read this post. Inside the upcoming CorkSport Blow Off Valve
I'm tired of getting all excited ever time I see something posted has posted on the thread in my email, just to find out its so noob, boob, or plain lazy person asking to get included a week after it solidified.
Please and thank you. Also @Joel@CorkSport; & @Austin@Corksport; we'd all still love a sound clip!

[The Nut]

Originally Posted by Joel@CorkSport Actually, the production version will have an adjustable banjo fitting so you'll have 360 degrees of adjustability.

Are us "test subjects" going to have a "production version" inclusive of said adjustable banjo fitting?

[CorkSport]

Originally Posted by The Nut Are us "test subjects" going to have a "production version" inclusive of said adjustable banjo fitting?

Yes, that's actually the only thing holding up shipments at the moment haha.

[zeroecco]

DAMNIT!!! I live right down the fucking road from you guys and I missed the opt in FUCK! Someone tell derrick I will be his gimp for a day so I can get in on this.

[CorkSport]

Originally Posted by zeroecco Someone tell derrick I will be his gimp for a day so I can get in on this.

You promise????

-Derrick

[evil MS3]

Can we get a dang sound clip? Lol

A little tapa tapa taparoo...

[jk_ms3]

It's supposed to sound like this:

Bubb Rubb and Leprechaun Mix - YouTube

Bubb Rubb and Leprechaun Mix - YouTube

[zeroecco]

Originally Posted by CorkSport You promise???? -Derrick

HELL YES I PROMISE

[ms3_goon]

I want this now. I CAN'T WAIT ANY LONGER.

[The Nut]

I have to admit, I'm getting worried my stock one can no longer handle the 21psi and is starting to fail. I may have to take some logs tonight and start a new thread. I talked to Austin, and he said they'd have more info for us this week.

[The Nut]

Bump for update

[ms3_goon]

Any word on this?

[CorkSport]

Almost done, we should have production piece pictures this week!!

[therza2169]

Does that mean the 10 early adopter pieces will be shipping next week as well?

[CorkSport]

Only the 5 people who haven't bugged me about it...

[motherfnmonsta]

Originally Posted by Joel@CorkSport Only the 5 people who haven't bugged me about it...

hey I haven't bugged you about it

[srchop16]

would like to get in on this, can't wait for it to be for sale