New CS intake manifold?

[lolwrx]

Discuss..

[Vansquish]

Interesting . . . looks to have meth injection ports as well.

[ms6mil]

Would the injection ports in line with the runner cause some meth distribution issues? Perhaps with the amount of airflow it would be negligible.

Looks heavy too.

[sleeperstang1994]

are we sure they are not boost/vacuum source lines. sort of like on the front of the JMF manifold?

[dale_gribble]

Pretty f'ing clean looking IMO. I see factory mount points, the taps are a nice touch.

Edit: make sure the im bolts can be put in and tightened to the head.

[Voltwings]

Originally Posted by dale_gribble Pretty f'ing clean looking IMO. I see factory mount points, the taps are a nice touch. Edit: make sure the im bolts can be put in and tightened to the head.

Shut up Brownie ... wait ...

[MattyP617]

Maybe I'm missing something, but where did this picture come from?

[ms6mil]

There's a couple of them floating around....

[Cujo]

I need dis.

[Yatta]

Mazda6 SKYACTIV-D Clean Diesel cars to tackle Thunderhill 25-hour | News | Motorsport.com looks like Car #56 is/was Continental Motors, Naperville, IL... is this a CS part or a Mazda R&D part? might be released before CPe’s manifold (sorry, 2 weeks).

looks nice and stockish

[kbz0129]

Pictures surfaced months ago but, little info has been released if I remember correctly.

[kbz0129]

@CorkSport can we get an update?

[ASHMS3]

@CorkSport; @Spencer@CorkSport; get in here and start talking.

[SpencerC]

The most recent photo that the OP pulled is straight from our Facebook page, also, the number 56 Mazda car has been in our shop for about 3-4 months. It is a Mazda car that we have been playing with.

Hopefully this link works:
https://www.facebook.com/corksport/p...type=1&theater

[TiGraySpeed6]

So what you're saying is it'll only cost $99.95 and we can pre-order today?

[SpencerC]

Sure...

just paypal me 99.95 at spencerwantsyourmoney@gmail.com, lol

[SpencerC]

Actually, no ETA yet, so far we have had over 2 years in development.

[Putin 2.3T]

2 weeks.. after never.

[Voltwings]

.

[SpencerC]

Originally Posted by Voltwings .

Best contribution yet.

[ImGryssLOL]

Originally Posted by Spencer@CorkSport Best contribution yet.

..

[MattyP617]

[TiGraySpeed6]

Check's in da mail
Should be there in two weeks




lolz

[dale_gribble]

Originally Posted by Voltwings Shut up Brownie ... wait ...

Browns gonna brown. Green = Gay. Brown = Down.

[Voltwings]

Originally Posted by Spencer@CorkSport Best contribution yet.

Brownies apparently cant delete posts, and i changed my mind about what i had said.

[SarcasticOne]

Originally Posted by Spencer@CorkSport Actually, no ETA yet, so far we have had over 2 years in development.

So...
This or CPE?
Not talking about better product, just first release :p

[SpencerC]

Lol, so far this whole thread has been rather sad. I have really no info, the photo shows more than I know, and ya'll I think realize that so it's pretty quiet.

[Putin 2.3T]

Maybe it's best to lock this thread.. delete it.. destroy all evidence.. and then swear to secrecy until this part is even a possibility. Because as of right now, I don't see that manifold coming into production until maybe '16-'17.

[Turbo_Steve]

I can haz manifold pleaze?

[MattyP617]

Originally Posted by Putin 2.3T Maybe it's best to lock this thread.. delete it.. destroy all evidence.. and then swear to secrecy until this part is even a possibility. Because as of right now, I don't see that manifold coming into production until maybe '16-'17.

but that's only 2 weeks away

[vinnyr1992]

Hey, I own a 2011 mazdaspeed 3 and it is giving me some problems, I have, CS 2,5" turbo intake,CS Top mounted turbo intercooler, CS CDFP, CS Turboback exhaust catted mid pipe,
Car hesitates A LOT on lower RPMs 1,500-3,000 while in gear; Not on neutral. as if someone was quickly pressing down the clutch while the car was in gear.
Please help me, inbox me please.

[kbz0129]

GTFO brownie! Go donate become VIP then maybe we might help you. You might also want to learn how the forum works. Wrong place to be asking this question.

[SarcasticOne]

Originally Posted by vinnyr1992 Hey, I own a 2011 mazdaspeed 3 and it is giving me some problems, I have, CS 2,5" turbo intake,CS Top mounted turbo intercooler, CS CDFP, CS Turboback exhaust catted mid pipe, Car hesitates A LOT on lower RPMs 1,500-3,000 while in gear; Not on neutral. as if someone was quickly pressing down the clutch while the car was in gear. Please help me, inbox me please.

All those mods and no hpfp

There's your problem...

[maisonvi]

Originally Posted by SarcasticOne All those mods and no hpfp There's your problem...

"CS CDFP" is the corksport fuel pump. but he still posted in the wrong spot with 3 post asking for help

[motherfnmonsta]

obvious troll

[Gixxer2k4]

No mention of tune either.

[acemanz]

Give ME DAT Intake Manifold! here is my money (v '.')> ~ ~ $$$$.¢¢

Real question though, CP-E mani doesn't work with the TMIC if i recall

Will this one fit the TMIC? and what about the injector foam noise insulator?(not that anyone really cares about the foam)

But yeah is this shit ganna fit?

[Turbo_Steve]

Originally Posted by acemanz With this one fit the TMIC?

Clearly it has the mounting points for a tmic in the picture.

[CorkSport]

The manifold is something we have been working on for a while. There is no date for this to be available if it makes it. That is a big if currently.

-Derrick

[acemanz]

Originally Posted by CorkSport The manifold is something we have been working on for a while. There is no date for this to be available if it makes it. That is a big if currently. -Derrick

Excuse me good sir but I do believe i just threw money at you.. doesn't that mean you have to do what we say?

... or is that just the women i know...

keep us posted you know we want it.