Turbo manifold

[SSinstaller]

I'm looking for a turbo manifold that situates the turbo differently than the stock setup. We have plenty of clearance on the MS6 so I hate have the turbo below and behind the head. I'm looking for a setup that mounts the turbo similarly to this:

[ptperformance]

Originally Posted by SSinstaller I'm looking for a turbo manifold that situates the turbo differently than the stock setup. We have plenty of clearance on the MS6 so I hate have the turbo below and behind the head. I'm looking for a setup that mounts the turbo similarly to this:

We can do that but its not something that is optimal. I like to have 45 degree up when it comes out of the head. This promotes flow and allows for the turbo to be located in the stock location still (oil lines, return, coolant ect don't have to be screwed with). Now we can put a nice big WG up there with a pretty polished dump tube. That would look nice.

I can do something like that for you but it would be a one off custom show piece... please bring money and lot of it for custom work.

[occschemguy]

im intrested in this to a top mount turbo is the kind for show cars! let me know how much were talking.

[ptperformance]

Originally Posted by occschemguy im intrested in this to a top mount turbo is the kind for show cars! let me know how much were talking.

All 321 polished ti'/stainless and you should be looking around $1600 to $1800 for the manifold alone, no WG or dump tube. It would also require a down pipe and we would have to decide if you wanted a recirc or open dump. Last time I did something like this was for a Nissan, the bill was over $4k and that was WG, manifold, dump tube and down pipe. It took close to a week to build and fit everthing in the car. Some sort of mini GTR motor in a 240 crap. The manifold was very small and faced down so something that faces up is going to cost more in materials.