Designed my own short shift plates

[SparkySparks]

Originally Posted by aackthpt Is there anyone trying this plate who has had the DM plate?

I had the sure plate and the MD plate. On the longest setting it matches up with MD and on the shortest setting it is almost as short as sure minus the cable rub.

[aackthpt]

Originally Posted by SparkySparks I had the sure plate and the MD plate. On the longest setting it matches up with MD and on the shortest setting it is almost as short as sure minus the cable rub.

How does the shifting smoothness measure up to the DM plate, yes in each of the positions?

I like the DM plate, but something just as smooth but with a shorter throw would be of interest.

[SparkySparks]

I've not tried it in the longest setting (felt the DM plate wasn't short enough) but in the shortest setting it is buttery smooth and fixed my 2-3 shift issue I had randomly. I actually got on it rather hard several times the past two days going through 1st thru 5th and had no issues at all. I'll be adding the other plate today and seeing how I like the extra weight.

[Enki]

I'm looking forward to mixing this thing with the TWM full replacement.

[udntknw]

Originally Posted by Enki I'm looking forward to mixing this thing with the TWM full replacement.

You should take mine for a spin. Should be pretty similar feel.

[SparkySparks]

I'm running it with a TWM full replacement, such a nice combo.

[anavrinIV]

Originally Posted by Turbo_Steve I had 10 sets made up. Off to powder coat tomorrow. And a few of these will be donated to the msf raffle giveaway.

Wanna make some of those gold?

[Turbo_Steve]

Custom colors could be possible. The first 10 were done in a nice gunmetal color.

They look beautiful.

[udntknw]

minor update: went to the track Sunday for Import Face Off, looking to do some gear banging. 1st pass felt pretty good, no missed shifts. 2nd pass... well.. the 1/2/3 shifts felt great, right up until i no longer had boost in 3rd. Turns out the turbo decided to say goodbye to the bearings. Unfortunately i dont have more than a single pass of feedback while banging, but the one pass felt pretty damn good!

[monkey.bones.007]

Originally Posted by udntknw minor update: went to the track Sunday for Import Face Off, looking to do some gear banging. 1st pass felt pretty good, no missed shifts. 2nd pass... well.. the 1/2/3 shifts felt great, right up until i no longer had boost in 3rd. Turns out the turbo decided to say goodbye to the bearings. Unfortunately i dont have more than a single pass of feedback while banging, but the one pass felt pretty damn good!

Sucks about the turbo, but I still will like that the plate rocked. I've not had any issues banging gears.

tapatalk, it sucks

[Turbo_Steve]

I've missed 3rd gear zero times since I installed this design. I'm actually still in love with the way my car shifts.

[SparkySparks]

Had some more fun hard and fast shifts the past couple of days. Really loving the feel!

[Turbo_Steve]

Hoping to launch sales of these in about a week. I am donating 2 production sets to the msf raffles for November.

I Just realized even though these should fit /work on an ms6 no problem, that I still need an MS6 tester.

Someone PM me if you have a 6.

Also to my current testers, I will be getting you guys all production plate sets if you want them. But that will be a few weeks at least.(going to do another big production batch shortly)

And I ordered up some product labels for these so they look a little more professional,

[Enki]

Finally know what AP stands for.

[superman]

Originally Posted by Enki Finally know what AP stands for.

This^

sent from my ONEPLUS 2

[SparkySparks]

Still loving mine, just realized I am completely slacking and need to post pictures for comparisons. Still loving the plate and have yet to miss third. I also still have not adjusted my cable, not sure what happen but everything is now shifting 100%, maybe I just needed to adjust to it being a little bit of a shorter shift then my other plate.

[Turbo_Steve]

I had to come up with a brand name.

Looks like I have my speed 6 tester.

[distortion]

Sorry if I missed it earlier but where will these be available from?

[Raider]

At this point, @Turbo_Steve; is looking to go to approved vendor status, and REALLY need to get this set up in order to sell to the members. We have a lot of test parts out, myself included, and the covers passed. But in fairness to the vendors of MSF, you need to get in with them to sell here on MSF. I have to lock this per forum rules. Once he has the vendor status, this thread will be moved to his section and unlocked.

[Raider]

Fwiw, he also emailed haltech last Thursday and no response.